Cedar & Plunge

Sauna running cost calculator

Electricity cost is heater power, times hours of use, times your rate. Enter the heater size from the product page and the rate from your bill.

Estimated electricity cost

- per session

- per month  ·  - per year

- kWh per session

How this is calculated

Energy per session (kWh) = power (kW) × (preheat + session minutes) ÷ 60 × heater share. Cost = energy × rate. A month is counted as 52 ÷ 12 weeks.

At 100% heater share the result is an upper bound: it assumes the heater draws full power the whole time. In practice a heater cycles off once the room is at temperature, so real cost is lower. Lower the share only if you have measured your own unit.

The default rate of 17 cents is a placeholder. Rates vary widely by state and province, so use the per-kWh figure on your bill.